BMYCF - V-LUBE B

  • MSDS: BMYCF
  • Manufacturer: STOKES VACUUM INC
  • Product Name: V-LUBE B
  • National Stock Number: 9150-00N028546
Product Identification

Product ID:V-LUBE B
MSDS Date:12/01/1988
FSC:9150
NIIN:00N028546
MSDS Number: BMYCF

Responsible Party
STOKES VACUUM INC
5500 TABOR ROAD
PHILADELPHIA, PA 19120
US

Emergency Phone: 215-831-5400;800-424-9300(CHEMTREC)

Info Phone: 215-831-5400

Preparer: RICHARD MAUNZ

Cage: GO130

Contractor
STOKES VACUUM INC
PHILADELPHIA, PA 19120-2124 US

Telephone: (215) 831-5400

Cage: GO130

Ingredients

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT REFINED HEAVY

CAS: 64741-88-4

RTECS: PY8040500

Fraction By Weight: 80-100%

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)


METHACRYLATE COPOLYMER

Fraction By Weight: 0-5%


SILICONE POLYMER (TRACE)

Fraction By Weight: 0-5%


SOLVENT REFINED RESIDUUM

CAS: 64742-01-4

Fraction By Weight: 0-20%

Hazards

LD50 LC50 Mixture:LD50: (ORAL,RAT) >15 G/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CONTACT WITH EYE MAY CAUSE
TEMPORARY TRANSIENT IRRITATION. NO PERMANENT DAMAGE EXPECTED.
CHRONIC: INHALATION OF OIL MIST MAY LEAD TO LIPID (OR CHEMICAL)
PNEUMONITIS.
Explanation of Carcinogenicity:CAS NO.64741-88-4 IS LISTED BY THE RTECS
AS AN IARC GROUP 1 CARCINOGEN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST: DO NOT INDUCE VOMTING. GIVE PLENTY OF WATER. GET
MEDICAL ATTENTION. SKIN: FLUSH WITH SOAP & WATER. REMOVE CNTMD
CLTHG & LAUNDER. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
GET MD IF IRRIT ATION PERSISTS. INHAL: REMOVE TO FESH AIR.

Fire Fighting

Flash Point Method:COC
Flash Point:465F,241C
Extinguishing Media:WATER FOG, CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE EXPECTED.

Accidental Release

Spill Release Procedures:ABSORB WITH SAND OR INERT MATERIAL. SWEEP OR
SCOOP UP AND REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NFPA CLASS IIIB STORAGE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED FILTER-DUST, FUME, MIST IF
MISTING OCCURS.
Ventilation:USE WITH ADEQUATE VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:V6
Vapor Pres:NIL
Vapor Density:17+(AIR=1)
Spec Gravity:0.88
Evaporation Rate & Reference:1000X SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:LIGHT AMBER FLUID W/LITTLE ODOR.
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:OPEN FLAMES.
Hazardous Decomposition Products:CO, AND ASPHYXIANTS.

Disposal

Waste Disposal Methods:FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS. DO
NOT FLUSH TO DRAIN.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.